Temafloor PU Flex Color

A solvent-free, flexible, two-component polyurethane coating used in Tikkurila Cozy Floor System.

• The M1 classification for low-emitting building materials has been granted by the Finnish Building Information Foundation RTS. M1 classification enhances good indoor air quality. Due to its extremely low VOC content Temafloor PU Flex Color ensures healthy environment in hospitals, schools and day care centers. • Elongation at break 200%. • Self-levelling coating is easy and fast to assemble, and easy to renovate when compared to conventional flooring solutions. • The wide range of available colours gives almost free hands to the designer.

• Water impermeable coating for new and old concrete floors exposed to moderate mechanical stress.

Practical coverage depends on the porosity and evenness of the substrate and on the application method. Film thickness 2 mm coverage approx. 2 liters/m2

Solventfree

Hardener should be stored in temperatures at around 20 C. The hardener starts to crystallize when exposed to temperatures below 20 C. Crystallization due to cold is reversible and the hardener can be melted and used without any impaired properties. For more information contact the producer.

The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying. Relative humidity of air should not exceed 80%.

Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.

First coat:

Serrated or adjustable steel trowel.

Thinner 1061

VOC 2004/42/EC (cat A/j) 500 g/l (2010) Temafloor PU Flex Color max. VOC < 1 g/l