Temafloor PU-UV Color

A solvent free, tintable flexible and weather resistant two-component polyurethane coating.

• Excellent resistance to UV. • Intended to be used as a UV-resistant topcoat on Temafloor PU floors in parking decks and other areas exposed to direct sunlight. • Withstands mechanical and chemical stress. • Self-levelling, to be applied with serrated or adjustable steel trowel. • The M1 classification for low-emitting building materials has been granted by the Finnish Building Information Foundation RTS.

• Silent, does not shrink or crack.

Practical coverage depends on the evenness of the substrate and on the application method. Film thickness 0.3mm coverage approx. 3.3 m2 per litre Film thickness 1.0mm coverage approx. 1 m2 per litre

Solventfree

The relative humidity of the concrete should not exceed 97%. Residual moisture content should be below 4 weight-%. During application or drying, the temperature of the ambient air, surface or coating should not fall below +15ºC and relative humidity of air should not exceed 70%.

Always remove all grease, oil, and other impurities with Maalipesu detergent before grinding. Remove laitance or old peeling paint layers by power grinding, milling, or vacuum grit blasting. Choose the method best suited for the premises. Clean out pot holes removing all loose or brittle material. Open cracks with e.g. an abrasive tool. After mechanical pre-treatment remove all loose material and dust carefully with a vacuum cleaner. The substrate must have a tensile strength above 1.5 MPa. For application on cementitious leveling screed: check compatibility with the leveling screed manufacturer.

First coat:

Serrated or steel adjustable trowel

Thinner 1061

VOC 2004/42/EC (cat A/j) 500 g/l (2010) Temafloor PU-UV: max. VOC < 500 g/l