Valtti Plus Base

Ready-to-use, water-borne, slightly bluish exterior wood preservative that absorbs in the base.For consumer and professional use. Retards moisture absorption as well as mold growth and the spread of rot and blue stain. This PT8 wood preservative product has been approved according to the rules of the Biocide Directive No. 528/2012 /EC; Authorisation No FI-2016-0006. A ready-to-use water-borne liquid.

Avainlippu

Valtti Plus Base

Ready-to-use, water-borne, slightly bluish exterior wood preservative that absorbs in the base.For consumer and professional use. Retards moisture absorption as well as mold growth and the spread of rot and blue stain. This PT8 wood preservative product has been approved according to the rules of the Biocide Directive No. 528/2012 /EC; Authorisation No FI-2016-0006. A ready-to-use water-borne liquid.

  • 805
  • 0.08 l/m²
  • 0.16 l/m²
  • 24 h
  • 0.5 h
Description

Ready-to-use, water-borne, slightly bluish exterior wood preservative that absorbs in the base.For consumer and professional use. Retards moisture absorption as well as mold growth and the spread of rot and blue stain. This PT8 wood preservative product has been approved according to the rules of the Biocide Directive No. 528/2012 /EC; Authorisation No FI-2016-0006. A ready-to-use water-borne liquid.


Product Features

For protection and priming of timber and wooden structures before surface treatment Suitable for logs, sawn and planed timber, thermally treated and impregnated wood in exterior use. Not to be used in interior surfaces. Not to be used on wood in direct contact with foodstuffs or animal nutrition. Use the product only as wood preservative as described in product data sheet and label. Finishing coat is recommended to be applied as soon as possible, because colorless wood preservative does not protect the wood surface from the adverse effects of sunlight.


Recommended Uses

All wooden structures to be treated with wood stains or paints (except surfaces to be treated with wood oils and barn-red paints). Woodwork outside (use categories 2 and 3). Can be used on wood components above grounds. Not for use on wood in direct soil or water contact or in marine environment.


Coverage

0,08-0,16 l/m² Sawn wood: 6-8 m²/litre per coat. Smooth wood: 8-12 m²/litre per coat.


Application Conditions

The surface to be painted must be dry. The temperature of the air must be at least +5 °C during treatment and drying, and the relative humidity of the air below 80 %. Use category 3 (weather sensitive outside use). Do not use the product in the rain or if rain is expected in the next 24 hours.


Surface preparation

Remove dirt, mold and any loose material from the surface to be treated. Wash down surfaces affected by dirt and mold with Tikkurila Mould Removal (Homeenpoisto) or Tehopesu (Power Wash) solution according to directions of use. Protect other surfaces and plants from splashes of primer. Cover all water containers prior to treatment.


Painting

First coat:

Treat wood surfaces with Valtti Plus Base priming oil (TOY) in as early construction phase as possible. Apply the priming oil by brush or spray. Stir before use. Handle the product in a well-ventilated place. Treat the end surfaces of the wood with special care. Apply the final surface treatment, for example by painting, as soon as possible, however after 24 hours at the earliest. If the surface treatment is anyhow delayed, prime the surfaces again. Treated wood exposed to rain has to be treated according to the recommendations of use delivered with the product in question. The finished surface has to be kept in good condition. Do not use products containing triazole fungicides for the finishing treatment. In exterior use protect the ground and plants from splashes. Do not apply in such place (e.g. a bridge above water), where there is a risk that the product would end up in the water. Freshly treated timber has to be stored under shelter or on impermeable hard surface. Possible paint drips have to be recovered for re-use or proper disposal. Unprotected persons and animals should be kept out of treated areas for 48 hours or until surfaces are dry. Do not use the product in the vicinity of food utensils, cutlery and surfaces where food in handled. Wear suitable protective clothing when handling the product or wood treated with the product. Avoid excessive contamination of protective clothing with the product used. Use wood preservatives safely. Always read the label and product information before use.


Protection for wood surfaces before finishing treatment.

Valtti Plus Base protects wood against mold, blue stain and rot. Wood priming oils are used under all exterior paints and stains, except wood oils.

Product usp1prof_img
The best durability and mold repellence for the whole painting system.

The best durability and mold repellence for the whole painting system.

The active substances in Valtti Plus Base keep the whole painting process cleaner from surface mold. The priming oil also gives more water resistance and improves the durability of the whole painting process.

Product usp2prof_img
Nokkalan Majakka

Bluish color for easier application

The product is slightly bluish. This makes it easier to see where the priming oil has been applied.

Product usp3prof_img
Interior wall
English
has been added to saved.
has been removed from saved.
en