Yki Sokkelimaali
Full matt
Alkali-resistant acrylic paint.
- Good weather resistance
- Wide range of colours
- With anti-mold agent
- 805
- 4 m²/l
- 6 m²/l
- 4 h
- 2 h
Finish
-
Full matt
Alkali-resistant acrylic paint.
Product Features
For painting of concrete socles and concrete and construction block socles rendered with a cement-rich mortar.
Recommended Uses
Socles
4–6 m²/l, one coat. Coverage is affected by the roughness and porosity of the surface as well as the painting method.
Thinner
Waterborne
Application Method
spraying, brush, roller
The surface to be painted must be dry, the temperature at least +5°C and the relative humidity of the air below 80%.
Surface preparation
The substrate has to be sufficiently solid, dry and hard before the finishing treatment. Unpainted surfaces: Clean the unpainted surfaces of any dirt, dust and salt. Surfaces with mold, moss etc. are cleaned with Tikkurila Homeenpoisto in accordance with the instructions. Smooth, glassy concrete surfaces must always be treated mechanically to create an appropriate surface profile and remove any laitance. Level block surfaces and uneven concrete surfaces with Yki Värilaasti according to the instructions in the product data sheet. Previously painted surface: Surfaces are cleaned by removing any dirt, dust or salt. Surfaces with mold, moss etc. are cleaned with Tikkurila Homeenpoisto in accordance with the instructions. Remove any flaking and poorly adhering paint coats. Select the removal method according to the strength of the substrate and paint type (e.g. wire brushing, pressure washing with hot water or wet sand-blasting). Render the surfaces with Yki Värilaasti according to instructions, as necessary.
Painting
First coat:
Stir the paint well before use. Apply 1–2 coats. If needed, the paint can be thinned for priming up to 20% with water. For finishing, use unthinned paint.
Maintenance Painting:
Surfaces painted with Yki Sokkelimaali are maintenance painted with Yki Sokkelimaali. See Pretreatment, Priming and Painting.
Maintenance Instructions
Dirty surfaces painted with Yki Sokkelimaali can be carefully washed with a pressure washer without any detergent no earlier than one month after painting. The washing may leave permanent marks on the surface, so the area to be washed should be designed inconspicuously following the lines of the structure. It is recommended to remove any loose dirt dry with a soft brush, avoiding abrasion. For removing algae and mold, use Tikkurila Homeenpoisto and rinse thoroughly according to instructions. NOTE: The surface must be treated again always after mold removal.
VOC
(Cat A/c) 40 g/l(2010) Yki-sokkelimaali contains VOC max. 40 g/l.
Good weather resistance
Durable paint Yki Sokkelimaali protects socles from the weather conditions, slowing down the impacts of water. The painted surface retains a good protective coating in case of moisture and heat. The impermeable surface of the paint keeps water out of the structure while allowing it to breathe water vapor out.
Wide range of colours
Full-matt paint is available in a wide range of colours to create colourful socles. The colour can be selected from all the shades of Tikkurila's socles and masonry facades colour cards. The wide range of colour options allows the building to fit elegantly into its surroundings.
With anti-mold agent
Yki Sokkelimaali contains an anti-mold agent that gives long-lasting protection against mold growth. Due to that painted surface stays clean longer.
You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?