Yki Sokkelipohjuste

Water-borne, silicone-based primer (concentrate).


Yki Sokkelipohjuste

Water-borne, silicone-based primer (concentrate).

  • 805
  • 24 h
  • 2 h

Water-borne, silicone-based primer (concentrate).

Product Features

For priming porous, water-absorbing unpainted surfaces or previously painted aggregate surfaces before painting with Kivisil façade paint, Finngard Silikonihartsimaali or other paints suitable for organic aggregate surfaces, such as Yki.

Recommended Uses

Residential, commercial, industrial, storage and other buildings.


Mixture coverage: 0.5–2 m²/l on rendered surfaces, 2–4 m²/l on concrete. Amount of silicone primer (undiluted) needed: 0.05–0.1 l/m² for rendered surfaces, 0.025–0.05 l/m² for concrete surfaces. The coverage is affected by the roughness and porosity of the substrate and the absorption qualities of any previous treatments applied to the surface to be primed.


Protect from frost. Store the concentrate in tightly closed cans. Storing temperature should not exceed +30 C. The-ready-to use mixture can be stored for a maximum of 24 hours.

Application Conditions

The surface to be treated must be clean, the ambient temperature at least +5 °C and the relative humidity of air below 80%. Do not apply the product to a wet or non-absorbent surface.


First coat:

Apply plenty of mixture thinned by water by using the wet-in-wet method. Paint the primed surface. The surface may be painted one day after priming at the earliest. Remove possible splashes immediately from window surfaces.

has been added to saved.
has been removed from saved.