Siro 2

Water-borne, full-matte dispersion paint for priming and painting of ceilings.

Suitable for painting of concrete, plaster, filler, plasterboard and wood fiberboard surfaces according to instructions.

Walls and ceilings in dry interior premises.

Theoretical coverage 5-11 m²/l. Recommended dry film thickness: 28-62 um. Practical coverage depends on the application method, conditions, absorbency and roughness of the surface to be treated.

Waterborne

spraying, brush, roller

Must be protected from frost. Store in a dry and cool place, protected from sunlight. Tinted paint or opened container does not withstand long-term storage. Close the can carefully for the next use.

The surface to be painted must be dry, the temperature at least +5°C and the relative humidity of the air below 80%.

Unpainted surfaces: Remove dirt and dust from the surfaces. If necessary, fill the surfaces with a suitable Tikkurila Presto or Prestonit filler and sand the dried surface. Remove the sanding dust. Previously painted surfaces: Wash the surfaces with diluted Maalipesu detergent. Fill the cracks and holes with a suitable Tikkurila Presto or Prestonit filler and sand the dried surface. Remove the sanding dust.

First coat:

Stir Siro 2 well before use and thin with water, if necessary. Apply 1-2 times with a roller, spray or brush.

Maintenance Painting:

Surfaces painted with Siro 2 can be maintenance painted with the same or similar water-borne paint. See Pretreatment.

Remove excess paint from tools and wash with water. Tikkurila Pensselipesu is recommended for paint that has hardened to a certain extent.

Approx. 1 month after painting at the earliest, if needed. The surfaces are dry cleaned with a vacuum cleaner, soft brush or dust towel. Cleaning with a damp cloth might leave a mark on the surface. The product achieves its final hardness and durability after one month under normal conditions, and therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, dry clean them with a vacuum cleaner, soft brush or a dust towel.

(cat A/a) 30g/l(2010) Siro 2 contains VOC max. 10 g/l.