Siro 7

Water-borne, matte dispersion paint for interior painting. Very low side sheen.

M1

Siro 7

Water-borne, matte dispersion paint for interior painting. Very low side sheen.

  • 8010
  • 8 m²/l
  • 12 m²/l
  • 2 h
  • 0.5 h

Finish

  • Matt

Description

Water-borne, matte dispersion paint for interior painting. Very low side sheen.


Product Features

Suitable for first application and maintenance painting of concrete, plaster, filler, plasterboard, chipboard, and wood fiberboard surfaces according to instructions.


Recommended Uses

Walls and ceilings in dry interior premises, e.g. living rooms, kitchens, offices and public spaces exposed to light wear.


Coverage

Theoretical coverage 8-12 m²/l. Recommended dry film thickness: 33-46 um. Practical coverage depends on the application method, conditions, absorbency and roughness of the surface to be treated.


Application Method

brush, roller, spraying


Storage

Must be protected from frost. Store in a dry and cool place, protected from sunlight. Tinted paint or opened container does not withstand long-term storage. Close the can carefully for the next use.


Application Conditions

The surface to be painted must be dry, the temperature at least +5°C and the relative humidity of the air below 80%.


Surface preparation

Unpainted surfaces: Remove dirt and dust from the surfaces. If necessary, fill the surfaces with a suitable Tikkurila Presto or Prestonit filler and sand the dried surface. Remove the sanding dust. Prime with Siro 2 or Ykköspohja. Previously painted surfaces: Wash the surfaces with diluted Maalipesu detergent. Sand the hard, glossy alkyd-painted surfaces non-glossy. Remove the sanding dust. Fill the cracks and holes with a suitable Tikkurila Presto or Prestonit filler and sand the dried surface. Remove the sanding dust. Prime with Siro 2 or Ykköspohja, if required.


Painting

First coat:

Stir Siro 7 well before use and thin with water, if necessary. Apply 1-2 times with a roller, spray or brush.


Maintenance Painting:

Surfaces painted with Siro 7 can be maintenance painted with the same or similar water-borne paint. See Pretreatment.


Cleaning of tools

Remove excess paint from tools and wash with water. Tikkurila Pensselipesu is recommended for paint that has hardened to a certain extent.


Maintenance Instructions

If needed, after approx. 1 month from treating the surface, at the earliest. The surfaces are cleaned with a dry brush or dust towel. Dirty surfaces are cleaned with a damp cleaning tool moistened in a neutral (pH 6-8) washing solution. The surface may not remain wet after cleaning. Follow the dilution instructions given by the detergent manufacturer when mixing the cleaning solution. The product achieves its final hardness and durability after one month under normal conditions, and therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them gently with a dry or damp cleaning cloth.


VOC

(cat A/a) 30g/l (2010) Siro 7 contains VOC max. 10g/l.


Low side sheen

The side sheen of Siro 7 wall paint is at the same level as the sheen measured directly from the front. This makes it easier to paint and touch up painted surfaces, as the lines between application areas are less visible.

Application properties optimized for professional use

The Siro range has been developed with particular consideration for the needs of professional painters. Siro is easy to apply with a roller and has a longer opening time.

Excellent value for money

Siro is a cost-effective solution for office, business, and housing production. It has received an M1 category for its low emissions.

English
has been added to saved.
has been removed from saved.
en