Valtti Pohjuste

Colorless, oil-based wood preservative absorbed into substrate. Fr external use on wood surfaces by consumers and professionals. Valtti Pohjuste is absorbed into wood, slowing down the absorption of humidity and the spread of bluestain. This wood preservative product (product group 8) is approved in accordance with the Biocidal Product Regulation (EU) No. 528/2012; permit no. UK-2014-0831/FI-2015-0014. Solvent-based liquid ready for use.

Avainlippu_NEW

Valtti Pohjuste

Colorless, oil-based wood preservative absorbed into substrate. Fr external use on wood surfaces by consumers and professionals. Valtti Pohjuste is absorbed into wood, slowing down the absorption of humidity and the spread of bluestain. This wood preservative product (product group 8) is approved in accordance with the Biocidal Product Regulation (EU) No. 528/2012; permit no. UK-2014-0831/FI-2015-0014. Solvent-based liquid ready for use.

  • 805
  • 4 m²/l
  • 12 m²/l
  • 24 h
  • 0.5 h
Description

Colorless, oil-based wood preservative absorbed into substrate. Fr external use on wood surfaces by consumers and professionals. Valtti Pohjuste is absorbed into wood, slowing down the absorption of humidity and the spread of bluestain. This wood preservative product (product group 8) is approved in accordance with the Biocidal Product Regulation (EU) No. 528/2012; permit no. UK-2014-0831/FI-2015-0014. Solvent-based liquid ready for use.


Product Features

For protection and priming of timber and wooden structures before surface treatment. Suitable for use on logs, sawn and planed timber, thermally treated and impregnated wood in exterior use before surface treatment. Use the product only as wood preservative as described in product data sheet and label. Finishing coats are recommended to be applied as soon as possible, because colorless priming oil does not protect the wood surface from the adverse effects of sunlight.


Recommended Uses

All wooden structures to be treated with wood stains or paints (except surfaces to be treated with wood oils and barn-red paints). Woodwork outside (use categories 2 and 3). Can be used on wooden parts left above ground that are either exposed to or protected from weather, but are exposed to repeated wetting. Not for use on wood in direct soil or water contact or in marine environment. Not to be used on interior surfaces.


Coverage

Sawn surfaces 4–5 m²/l. Planed surfaces 10–12 m²/l.


Application Method

brush, spraying


Application Conditions

The surface to be treated must be dry, the temperature of the air at least +5 °C and the relative humidity of the air below 80% during treatment and drying.


Surface preparation

Remove dirt, mold and any loose material from the surface to be treated. If needed, use Mold Removal (Homeenpoisto) according to the directions for it´s use. Protect other surfaces and plants from splashes of Valtti Pohjuste. Cover all water containers prior to treatment.


Painting

First coat:

Treat wood surfaces with Valtti Pohjuste in the earliest possible phase of construction. Spread a generous amount of Valtti Pohjuste with a brush. Treat the end grains of the wood with particular care. Do not use the product in the vicinity of food utensils, cutlery and surfaces where food in handled. Wash the hands and other exposed skin before meals and after use. Unprotected persons and animals should be kept out of treated areas for 48 hours or until surfaces are dry. Do not allow the product to enter soil or surface water during the treatment or the drying of the surface. Protect plants and fish ponds before treatment. Apply the final surface treatment as soon as possible, however after 24 hours at the earliest. If the surface treatment is delayed over winter, we recommend a new priming before surface treatment. Use wood preservatives safely. Always read the label and product information before use.


Prevents the spread of mold

Valtti Pohjuste (Primer) is a colorless protective agent that is absorbed deep into the wood, making the surface water-repellent and retarding the absorption of moisture and, consequently, the spread of mold on the treated surface.

Product usp1prof_img
base for log surfaces

Makes finishing easier

Valtti Pohjuste (Primer) improves the adhesion of the topcoat and keeps it clean longer. Primed board surfaces can be finished with Tikkurila house paints or the Vinha or Valtti stains. Timber surfaces can be finished with Valtti stains or Vinha.

Product usp2prof_img
log house window

Dry to touch in half an hour.

Valtti Pohjuste (Primer) is touch-dry in just about half an hour. The surface treatment can be applied after 24 hours of drying.

Product usp3prof_img
valtti pohjuste coating
English
has been added to saved.
has been removed from saved.
en