Metal Primer WB
Matt
Water-borne anti-corrosion primer with good adhesion abilities.
- Water-borne protection
- Good adhesion
- Top coats
- 858
- 7.5 m²/l
- 8.5 m²/l
- 2 h
Finish
-
Matt
Water-borne anti-corrosion primer with good adhesion abilities.
Product Features
Metal Primer WB allows the use of Isonite and Rubber on metal roofs. Metal Primer WB always has to be coated with Isonit or Rubber.
Recommended Uses
Suitable for sheet metal roofs and old roof plates coated with plastisol.
8 m²/l (120 μm wet film/ 45 μm dry film). The practical spreading rate depends on application method, form and surface of the material.
Thinner
Waterborne
The temperature must be between +8°C and +30°C and relative humidity <85 % RH.
Painting
First coat:
Stir Metal Primer WB well before use. Apply with a brush, roller or airless spray (nozzles 19 – 21, 180 - 220 bar). Use unthinned. If necessary, the product can be thinned with water max. 5 %. Always make a test coat to ensure the compatibility of product and surface.
VOC
(cat A/h) 30g/l(2010) Metal Primer WB contains VOC max. 30 g/l.
Water-borne protection
Metal Primer WB is a water-borne anti-corrosive primer for sheet metal roofs and old roof plates coated with plastisol.
Good adhesion
Metal Primer WB has good penetration abilities and it ensures good adhesion.
Top coats
Metal Primer WB allows the use of Isonite and Rubber on metal surfaces. Metal Primer WB always has to be coated with Isonit or Rubber.
You’re visiting Tikkurila website from United Kingdom. Would you like to visit the local UK site?