CE marked products

Water-borne, alkali-resistant acrylic paint that protects concrete against humidity and carbonation. SILKO approved (3.253).

Water-borne, alkali-resistant, hydrophobic, paint-like acrylic coating that protects concrete against humidity and carbonation. Maximum grain size approx. 0.5 mm. SILKO approved (3.253).

Water-borne, silicone resin coating, which stays clean. Due to its super hydrophobic surface, the coating repels soil and water well, keeping the structure clean and dry. Max. grain size approx. 1...

Water-borne, silicone resin coating, which stays clean. Due to its super hydrophobic surface, the coating repels soil and water well, keeping the structure clean and dry. Max. grain size approx. 3...

Water-borne, alkali-resistant silicone modified acrylic paint that protects concrete against humidity and carbonation. Finngard Silicone Allweather has early rain resistance and extended...

Polymer-modified cement mortar containing fiber and additives that prevent shrinkage and improve thixotropy and adhesion.

Polymer-modified cement mortar containing fiber and additives that prevent shrinkage and improve thixotropy and adhesion.

Polymer-modified fiber-reinforced cement-based thin render with a maximum grain size of 0.6 mm.

Paste-like manually applied patch mix and filler for concrete surfaces that hardens and dries rapidly.

Polymer-modified cement mortar that slows down the penetration of moisture and carbon dioxide into the underlying concrete. Finnseco Polytop, gray: SILKO-approved (3.231). Grain size 0–0.6 mm.

Polymer-modified cement mortar, which slows down the intrusion of moisture and carbon dioxide into the underkying concrete. Maximum grain size of 0.6 mm.

Pumpable or hand-applied, air entrained lime-cement dry mortar. High lime content. Breathable and weather resistant. Max. grain size 3,0 mm.

Pumpable or hand-applied, air entrained lime-cement dry mortar. High lime content. Breathable and weather resistant. Max. grain size 0,6 mm.

Fiber-reinforced mortar with cement used as a binder, suitable for spraying; maximum grain size: 3.0 mm. SILKO-approved (3.231).

Inorganic cement coating; maximum grain size approx. 0.5 mm.

Polymer-modified premixed dry mortar with additives, containing an inhibitive pigment. Maximum grain size: 0.6 mm.

Mortar containing a water-reducing agent and cement used as a binder; maximum grain size: 3.0 mm.

A two-component, water-borne polyurethane lacquer.

A two-component water-borne epoxy paint for interior applications.

A two-component, waterborne self-levelling epoxy screed.

A two-component water-borne epoxy lacquer for indoor use.

Solventborne, hydrophobic impregnating agent.

IsoPondi roof paint is a two-component aliphatic, brushable polyurea coating with excellent UV-resistance and waterproofing properties for granulated bitumen roofs. IsoPondi is CE-marked according...

Elastic and hardened by air humidity, UV-resistant, low-solvent single component polyurethane floor coating.

Single-component polyurethane primer cured by air humidity

Elastic, self-levelling, UV-resistant, solvent-free 2-component polyurethane floor coating.

Ready-to-use, light all-around filler. Water-borne. Minor shrinkage and good adhesion. Fulfils the
requirements of wear resistance category 04.

Water-borne, ready to use renovation filler. Filling ability 4 mm with no cracking. Minimal shrinkage and good adhesion.

Water-borne, ready-to-use filler for filling gypsum board seams. Filling ability: 2 mm with no cracking.

Water-borne, ready to use renovation filler. Filling ability 4 mm with no cracking. Minimal shrinkage and good adhesion.

- Ready to use, high-quality light filler. Water-borne. Filling ability 6 mm with no cracking. Easy to apply, minimal shrinkage and excellent adhesion.

Water-borne, ready to use high build filler. Filling ability 0-30 mm without cracking. Minimal shrinkage and good adhesion.

Water-borne, ready to use light filler for wet rooms. Filling ability 4 mm with no cracking. Minimal shrinkage and good adhesion.

Water-borne, ready-to-use light filler for roller application. Filling capacity 3 mm without cracking and good adhesion on various substrates.

Ready-to-use spray plaster. Fulfills the requirements of wear resistance category 04.

Ready-to-use spray plaster. Fulfills the requirements of wear resistance category 04.

Ready-to-use, light spray filler. Water-borne. Minor shrinkage and good adhesion. Fulfils the requirements of wear resistance category 04.

Ready-to-use spray plaster. Fulfills the requirements of wear resistance category 05.

A two-component solvent-free epoxy paint.

A water-borne two-component water-vapor-permeable epoxy paint.

Matt water-borne two-component polyurethane lacquer for concrete floors.

A two-component solvent-free epoxy paint for indoor use.

A two-component solvent-free epoxy varnish.

A two-component solvent-free epoxy varnish.

A two-component solvent-free epoxy varnish.

A one-component moisture curing polyurethane primer and topcoat.

A solvent-free epoxy resin screed. The screed is prepared by adding sand toTemafloor P300 epoxy coating mixture.

A two-component solvent-free epoxy varnish for indoor use.

A solvent-free Temafloor 4000 troweling screed is prepared by adding sand to Temafloor 400 epoxy varnish mixture.

A solvent-free Temafloor 4000 ESD troweling screed is prepared by adding conductive sand mixture to Temafloor 401 epoxy varnish mixture.

A two-component solvent-free epoxy varnish.

A two-component solvent-free, low emission, encapsulation epoxy primer.

A two-component, solvent-free low viscosity acrylic primer.

A two-component, solvent-free low viscosity acrylic binder.

A two-component, solvent-free, elastic acrylic binder.